OLED 128×64

Updated: All, Breakouts Leave a Comment

128×64 SPI 5V compatible OLED display.  .  .  .  .

Purchase Options

Current
Version 1.0

Layout

  • Connector.

    SPI Pins

    VIN GND CS RES DC CLK DIN NC

  • Connector.

    Ground

    Phyiscal Support

  • Connector.

    5V

    If chip placed then 5V version

Assembly

  • 1x OLED 128×64
  • Breadboard Adapter (Optional)
  • 8pin Male Header (Optional with adapter)
The display comes assembled with 2mm headers.

Assembly only requires some light soldering of the male headers. The easiest way is to insert the male headers in the breadboard and lay the display on top. Soldering from the middle outward.

Important Notes

  • These are the 5V version but there is a 3.3V version which doesn’t have the logic translation IC on the back.

Downloads

Leave a Reply